SCH Paddock and Pasture Units

Lightweight at 36kgs, the SCH chain harrow is easy to pull by a garden tractor or ATV.  It is 1530mm (60") in width and 1480mm (58") in length.

The major feature of this chain harrow is that it can be pulled in three different directions to suit the desired effect. The tines of the harrow protude more if pulled in one direction creating an aggressive application. If the tow bar is changed to the other end of the chain harrow, the tines protrude less, creating a passive application. The harrow can also be turned upside down for levelling grassed areas.

The standard ring fits over a 50mm ball hitch.  An optional ball hitch can be fitted (see accessories below).

Also available as a 6' working width model.

This chain harrow is suitable for work behind tractors of 15hp and above to remove dead vegetation from lawns, paddocks and large grassed areas.

Chain harrows are suitable for seed and bed preparation; both levelling and covering. They are also extremely useful for the rejuvenation of horse arenas.

The standard ring fits over a 50mm ball hitch.  An optional ball hitch can be fitted (see accessories below).

The scarifying rake is a multi-purpose tool for levelling, scarifying many types of surfaces - grass, shingle driveways, sand and composition arenas, seed beds etc.

It will remove dead and matted grass from pasture land, paddocks and rough grassed areas. The rake may also be used for combing through the horse menages, freshening up large drives and gravelled areas.

The two rows of heavy-duty spring tines dig into the surface pulling out dead grass. With the transport wheels removed and the unit turned over it becomes a very efficient levelling unit to tackle mole hills and level seed beds.

New for gravel drive maintenance

The unique tow bar allows the rake to tow in an angled position.  A side blade is fitted to pull gravel in from the side which has been pushed to the edge.

Please note: To avoid damage during transit, the tines are supplied loose, and SCH fit only one tine as an example of how to do this.

This chain harrow is 1500mm (6') in length and 1880mm (74") in length, suitable for work behind tractors of 15hp and above.

The major feature of the chain harrow is that it can be pulled in three different directions to suit the desired effect. The tines of the harrow protude more if pulled in one direction creating an aggressive application. If the tow bar is changed to the other end of the chain harrow, the tines protrude less, creating a passive application. The harrow can also be turned upside down for levelling grassed areas.

The standard ring fits over a 50mm ball hitch. An optional ball hitch can be fitted (see accessories below).

Also available as a 5' working width model.

This SCH scarifying rake has four rows of heavy-duty spring coiled tines which are arranged in a staggered pattern and will tease out the thatch and dead grass from paddocks and large grass areas.  A weight tray on top of the unit allows ballast weight to be added to give extra penetration. 

Depth control wheels which also act as transport wheels are fitted as standard, as well as a rise & fall clevis hitch to ensure that all the tines are level whatever the height of the tow hitch.

Please note: To avoid damage during transit, the tines are supplied loose, and SCH fit only one tine as an example of how to do this.

The SCH 3MCH comprises a 122cm width chain harrow mounted on a frame which incorporates category 1 three-point linkage. 

The main advantages of this form of mounting is ease of transport, reversing and turning at row ends For simple and easy clearing of debris from the tines, the 3MCH is more manoeuvrable on the corners and avoids over-harrowing on the headlands.

Also available in 2440mm (8') working width (Ref: 8MCH).

The SCH 3SR scarifying rake features four rows of heavy-duty spring coiled tines, each row having eleven twin tines.  The tines are staggered to give excellent coverage over the ground. The tines being spring-mounted "jigger" over the ground, pulling and teasing out the dead thatch and matt.

The 3SR is mounted on a three-point linkage with standard category 1 link size. Other linkage categories can be supplied.

Please note: To avoid damage during transit, the tines are supplied loose, and SCH fit only one tine as an example of how to do this.

The EPB has been built to reduce the manual collection of horse droppings and improve pasture management.

Suitable for use with most garden tractors and ATVs. Four rows of tough propropelene brushes that can sweep horse droppings, wet / dry grass and leaves. The brush height can be easily adjusted.

The regular removal of droppings promotes healthy grass and helps reduce droppings related diseases. Four rows of height adjustable brushes rotate at variable speeds to flick the droppings into the rot proof rear collecting box. The brushes are driven by a 5.5hp Honda engine equipped with a speed reduction gear box which incorporates a centrifugal clutch, this means when the engine speed is reduced the brushes stop revolving, a necessary feature when moving from heap to heap.

The Equestrian Powered Brush can also be used for other sweeping tasks e.g. car parks etc. The tow hitch is fitted with a 50mm ball hitch.

The unit has four pneumatic wheels; the collection box is made of strong plastic material, mounted on heavy tubular frame, thus making this a durable machine for many years use.

The brushes are easily changed when they become worn.

Optional extras:

• Clevis hitch
• Ball hitch

This collector has been designed specifically by British manufacturer SCH (Supplies) to harvest seeds in wild flower meadows. The brushes are powered by a Honda 5.5hp petrol manual start engine.

The collector drawbar is offset from the pulling vehicle so that the flowers are not flattened before the seeds are collected. The seeds are collected in the integral rear-mounted collection compartment which can easily be emptied via a convenient access door located on the side of the machine. The collected seeds can then be discharged into a bucket or sack by removing the internal drawer.

Featuring a working width of 925mm (37"), the height is adjustable from as low as 150mm (6") up to a maximum of 600mm (24").  A manual hydraulic pump operates a ram mounted at the rear of the unit that allows simple height adjustment.