Hansa Wood Chippers

If you manage a domestic property with trees, flowers or a vegetable garden, you may find the average small electric shredder is not up to the job of processing the volume of all your prunings and trimmings into mulch.  The Hansa C3E is the most robust and user friendly electric chipper on the market and is ideal for use all year round as you carry out your winter pruning, spring clean up or trimming back in summer.

Designed and built in New Zealand by chipper specialist Hansa Products, the C3E is powered by a 1500 watt / 2hp single phase electric motor. Starting could not be easier, just plug it in, turn it on and chip away! 

The C3E features robust steel housing which is media blasted prior to powder coating for complete adhesion and a durable finish. The input chute is designed with the user in mind. It includes a large opening and is angled at a comfortable operating height to make the most of its self-feeding action of branches up to 30mm in diameter. The cutting knives shear the fed material against an adjustable, hardened anvil with a scissor like action.

The draught action rotor allows the mulched material to be discharged directly from the outlet out to the side onto the ground. An optional debris bag is available for collection.

Blockages are rare, but should you need to clear the housing or access knives for servicing, the C3E electric chipper is designed to open easily and safely with the removal of four bolts.

Thanks to a well-balanced design and built-in handles, large solid rubber wheels and low centre of gravity, the Hansa C3E is easy to move around between work sites.

Confirms to ASNZS62841.1-2015 standard. 

Keeping your property ship-shape all year round by dealing with unwanted garden waste is less of a chore with the Hansa C4 petrol chipper. Whether you are carrying out your winter pruning, spring clean up or trimming back in summer, this solid yet lightweight chipper will handle all the demands of a domestic garden - including fibrous materials.

Designed and built in New Zealand by chipper specialist Hansa Products, the C4 is powered by a quality, easy-starting 163cc Honda GCX160 four-stroke engine with recoil start. A single V-belt drive between the engine and rotor provides smooth running and protects the engine against shock loads.

The C4 features robust steel housing which is media blasted prior to powder coating for complete adhesion and a durable finish. The infeed chute is designed with the operator in mind and has a 50mm branch diameter capacity. It includes a large opening and is angled at a comfortable working height to make the most of its self-feeding action. The cutting knives shear the fed material against an adjustable, hardened anvil with a scissor like action.

The draught action rotor allows the mulched material to be discharged directly from the outlet out to the side onto the ground. An optional debris bag is available for collection.

Blockages are uncommon, but should you need to clear the housing or access knives for servicing, the C4 petrol chipper is designed to open easily and safely with the removal of four bolts.

Thanks to a well-balanced design and built-in handles, large solid rubber wheels and low centre of gravity, the Hansa C4 is easy to move around between work sites.

The Hansa C5 is a powerful chipper built with simplicity in mind. The C5 is the market leader in its class. With a chipping capacity of 60mm in diameter, you can chip any type of branches or prunings with ease. The optimised self-feeding action gets the job done even faster.

Optimised for higher performance, branches and prunings are pulled into and through the machine by the powerful 6.6kg cutting disc and specially angled inlet chute. This self-feeding action coupled with a large inlet opening at a comfortable operating height makes chipping fast, effective and easy.

Engineered and manufactured in New Zealand to last a lifetime, using only the highest quality components and powered by the 6.5hp Honda GP200 the C5 delivers in the toughest of conditions. Made of steel and finished with a durable powder-coated finish with zinc shield rust protection delivers longevity.

The compact and lightweight design allows the chipper to be moved around with ease by one person. With a weight of just 67kg, balanced ergonomically across the solid construction wheels, moving the C5 in and out of the garden shed is a breeze.

The C5 is a low maintenance chipper, with minimal moving parts maintenance is easy. The A8 modified steel knife boasts an impressive lifespan of ca. 300 hours across 10 sharpenings.

If you maintain a substantial garden, the Hansa C7 petrol chipper is the ultimate weapon capable of tackling most garden debris including branches, general prunings, hedge cuttings, vines, flower stalks and even fibrous material.

Starting the C7 is easy thanks to the soft start engagement system. The 6.5 horsepower of the quality Honda GCX200 196cc four-stroke engine is transmitted to the cutting disk through a twin belt drive, which provides smooth running and protects the engine against shock loads.

Operating with two cutting knives, the heavy duty C7 has the appetite to chip branch material (green or dry) up to 70mm in diameter. 

With the Hansa C7 no pre-cutting is necessary and the branches are drawn into the input chute. The cutting blades shear the material against an adjustable hardened counterknife, or anvil. This action will be just as efficient in 10 years' time as on the first day of use, so long as the knives are kept sharp.

The extremely efficient self-feeding action can be attributed to the design of the rotor and the blade set up. The inertia generated by the large rotor disk creates enough momentum to continue cutting, as well as providing plenty of draught to discharge the mulch up to 4 metres away. The distance can be moved closer to the operating area, if desired, by adjusting the deflector on the chute. Having a discharge height of 0.7 metres makes the C7 model ideal for discharging onto a trailer or wheelbarrow, thus eliminating the need for any double handling of the material.

The simple design of the C7 allows full access to the inside of the machine by pivoting open the outlet chute, so that changing the blades for sharpening is simple and requires little effort. The blades can last anywhere up to 30 hours before requiring sharpening, depending on the type of material being handled. The cantilver rotor design allows stringy materials to be processed without running the risk of wrapping around the shaft.

Built to last, the housing, inlet and outlet chutes of Hansa chippers and shredders are made of solid steel, with no plastic components. The C7 is fitted with large pneuamtic wheels and integral handles for easy transportation, and rugged feet to keep the machine static during operation.

The Hansa C13 PTO (power take off) wood chipper is suitable for large estates, local authories, golf courses, contractors, farmers and orchadists in their quest to recycle valuable organic waste. Suitable coupled to any small tractor from 17hp to 45hp, simply hitch the chipper to your three-point linkage and run 540rpm to give you a machine that has the same capabilities as its engine-powered equivalent. 

The Hansa C13 will mulch your organic matter to produce the finest fertiliser in the form of compost in a matter of weeks, or for use as mulch to surpress weed growth and retain moisture in the soil.

Employing two cutting knives, the heavy duty C13 has the appetite to chip branch material (green or dry) up to 90mm thick. 

With the Hansa C13 no pre-cutting is necessary and the branches are drawn into the input chute. The cutting blades shear the material against an adjustable hardened counterknife, or anvil. This action will be just as efficient in 10 years' time as on the first day of use, so long as the knives are kept sharp.

The extremely efficient self-feeding action can be attributed to the design of the rotor and the blade set up. The inertia generated by the large rotor disk creates sufficient momentum to continue cutting, as well as providing enough of draught to discharge the mulch up to 4 metres away. The distance can be moved closer to the operating area, if desired, by adjusting the deflector on the chute. Having a discharge height of 1.2 metres makes the C13 model ideal for discharging onto a trailer, wheelbarrow or stockpile, eliminating the need for any double handling of the material.

Access to blades and clearing of the cutting chamber is simple - a few turns of the wingnut and everything is accessible within seconds. The blades are individually adjustable, eliminating the need for angle adjustment and allowing optimal clearance. The blades can last anywhere up to 30 hours before requiring sharpening, depending on the type of material being handled. 

The C13 housing is constructed from 5mm steel plate with a quality powder-coated finish (media-blasted surface for excellent adhesion), which provides the strength and resilience that means this machine will last you a lifetime. 

Landscape gardeners and maintainers of serious acreages will be impressed by the Hansa C13's ability to successfully recycle organic waste.

This is the ideal machine for small- to medium-sized horticultural businesses, orchards, nurseries, farms, school grounds and parks where organic waste is too precious to burn or dump. The Hansa C13 will mulch your organic matter to produce the finest fertiliser in the form of compost in a matter of weeks, or for use as mulch to surpress weed growth and retain moisture in the soil.

Starting the C13 is easy thanks to the soft start engagement system. The 6.5 horsepower of the quality Honda GCX200 196cc four-stroke engine is transmitted to the cutting disk through a twin belt drive, which provides smooth running and protects the engine against shock loads.

Employing two cutting knives, the heavy duty C13 has the appetite to chip branch material (green or dry) up to 90mm thick. 

With the Hansa C13 no pre-cutting is necessary and the branches are drawn into the input chute. The cutting blades shear the material against an adjustable hardened counterknife, or anvil. This action will be just as efficient in 10 years' time as on the first day of use, so long as the knives are kept sharp.

The extremely efficient self-feeding action can be attributed to the design of the rotor and the blade set up. The inertia generated by the large rotor disk creates sufficient momentum to continue cutting, as well as providing enough of draught to discharge the mulch up to 4 metres away. The distance can be moved closer to the operating area, if desired, by adjusting the deflector on the chute. Having a discharge height of 1.2 metres makes the C13 model ideal for discharging onto a trailer, wheelbarrow or stockpile, eliminating the need for any double handling of the material.

Access to blades and clearing of the cutting chamber is simple - a few turns of the wingnut and everything is accessible within seconds. The blades are individually adjustable, eliminating the need for angle adjustment and allowing optimal clearance. The blades can last anywhere up to 30 hours before requiring sharpening, depending on the type of material being handled. 

The C13 is fitted with large pneuamtic wheels and and a front castor wheel for easy transportation.The C13 housing is constructed from 5mm steel plate which provides the strength and resilience that means this machine will last you a lifetime. 

The Hansa C16C is a semi-commercial petrol wood chipper ideal for dealing with large scale organic waste. The machine's compact design means it can be easily manoeuvred and operated in areas with restricted access, and it is narrow enough to fit through a standard gateway.

This disc-type chipper is of solid construction with a chipping capacity of 110mm diameter branches, depending on the type of wood. The C16C features a large inlet chute to accommodate big bundles of prunings. It has a very efficient self-feeding action thanks to the design of the rotor and blade set-up. The inertia generated by the large rotor disc creates the momentum to efficiently cut and discharge the mulch up to 8 metres away (or close to the operating area by adjusting the deflector on the outlet chute). The 1.5 metre discharge height of the C16C makes this model ideal for discharging onto a trailer or truck, eliminating the need for any double handling of mulch.

Pivoting open the outlet chute allows full access to the inside of the machine for sharpening and changing the blades. As with all of the larger Hansa chippers, adjustable blades eliminate the need to adjust the anvil after sharpening, giving the ability to adjust each blade individually to the anvil for optimal clearance. The blades will last anywhere up to 30 hours use before requiring sharpening, depending on the type of material being mulched.

The Hansa C16C is powered by a 16hp V-twin Briggs & Stratton Vanguard engine with recoil start.