Equestrian, Manege & Small-Holding Equipment

The SCH arena maintenance unit will quickly and efficiently maintain your synthetic or sand surface menage. The proper maintenance of the surface will prolong its life. The unit is of a strong metal construction for long life and has a 4' working width.

A diagonal cross arm (supplied as standard) clips onto the underside of the frame to "pull in" the build of material that works its way to the "kickboards".

Freshen up the appearance of your driveway, whilst reducing weeds with this pea shingle rake designed by British manufacturer SCH Supplies.

The gravel rake, which features a working width of 990mm (39"), helps to elminate the need for chemical herbicides which can be a concern on a drive that is frequented by children and pets.

By pulling / securing the attached rope, the rake can be easily reversed into corners or transported to the driveway by lifting the tines off the ground. The gravel rake is equipped with two rows of spring tines which can be easily replaced when worn.

The standard drawbar is the rise and fall clevis hitch, however a 50mm ball hitch can be fitted as an optional extra.

The rubber surface arena maintenance unit has been developed and manufactured by SCH to rejuvenate areas with rubber surfaces. The unit is free floating and may be towed by a 4x4, ATV or garden tractor. The front row of adjustable spring tines tedder through the surface alleviating compaction build-up. The two rear bars ride over the surface levelling out the rubber chips.

The unit is fitted with a removable side blade, to pull in material deposited on the kicking boards.

It can also be used on gravel drives.

Please note: To avoid damage during transit, the tines are supplied loose, and SCH fit only one tine as an example of how to do this.

Lightweight at 36kgs, the SCH chain harrow is easy to pull by a garden tractor or ATV.  It is 1530mm (60") in width and 1480mm (58") in length.

The major feature of this chain harrow is that it can be pulled in three different directions to suit the desired effect. The tines of the harrow protude more if pulled in one direction creating an aggressive application. If the tow bar is changed to the other end of the chain harrow, the tines protrude less, creating a passive application. The harrow can also be turned upside down for levelling grassed areas.

The standard ring fits over a 50mm ball hitch.  An optional ball hitch can be fitted (see accessories below).

Also available as a 6' working width model.

This chain harrow is suitable for work behind tractors of 15hp and above to remove dead vegetation from lawns, paddocks and large grassed areas.

Chain harrows are suitable for seed and bed preparation; both levelling and covering. They are also extremely useful for the rejuvenation of horse arenas.

The standard ring fits over a 50mm ball hitch.  An optional ball hitch can be fitted (see accessories below).

Styled on the popular plastic bodied trailer, the SCH trailer barrow features a strong, moulded, rot proof plastic body with a 500kg (10cwt) carrying capacity. The PTPTB is perfectly suited for mucking out stables before being driven to the muck heap.

The barrow handles are incorporated in the chassis, with an additional tow bar to allow the barrow to be towed when required. The sturdy metal chassis gives superb support to the undeside of the trailer body. The body is moulded from a strong commercial-grade plastic, so it will withstand the carting of corrosive material such as animal waste.

Optional extras:-

50mm ball hitch

The scarifying rake is a multi-purpose tool for levelling, scarifying many types of surfaces - grass, shingle driveways, sand and composition arenas, seed beds etc.

It will remove dead and matted grass from pasture land, paddocks and rough grassed areas. The rake may also be used for combing through the horse menages, freshening up large drives and gravelled areas.

The two rows of heavy-duty spring tines dig into the surface pulling out dead grass. With the transport wheels removed and the unit turned over it becomes a very efficient levelling unit to tackle mole hills and level seed beds.

New for gravel drive maintenance

The unique tow bar allows the rake to tow in an angled position.  A side blade is fitted to pull gravel in from the side which has been pushed to the edge.

Please note: To avoid damage during transit, the tines are supplied loose, and SCH fit only one tine as an example of how to do this.

This chain harrow is 1500mm (6') in length and 1880mm (74") in length, suitable for work behind tractors of 15hp and above.

The major feature of the chain harrow is that it can be pulled in three different directions to suit the desired effect. The tines of the harrow protude more if pulled in one direction creating an aggressive application. If the tow bar is changed to the other end of the chain harrow, the tines protrude less, creating a passive application. The harrow can also be turned upside down for levelling grassed areas.

The standard ring fits over a 50mm ball hitch. An optional ball hitch can be fitted (see accessories below).

Also available as a 5' working width model.

The SCH 3MMU is a three point hydraulic tractor mounted manége unit with a 60" working width.  It is fitted with a removable side mounted dozer attachment to 'pull in' the build up of material which accumulates on the edges. The front row of adjustable depth controlled spring tines tedder through the surface to alleviate any compaction build up.

Other widths can be supplied to order.

Please note: To avoid damage during transit, the tines are supplied loose, and SCH fit only one tine as an example of how to do this.

A strongly constructed transport box from SCH with tipping facilities.  The tailgate is removable fore ease of emptying and loading.

This SCH plastic bodied tipping trailer runs on large four-stub flotation wheels which are designed for use with an ATV at the extra width of the wheels increases stability at higher speeds. These bearing hubs are able to tolerate tight corners found in stable yards, walled gardens, etc, when fully loaded without damage to the heavy-duty axle. These specially mounted wheels are a must when operating on soft ground conditions or across unfriendly terrain.

The sturdy metal chassis gives superb support to the underside of the rot-proof trailer body.   A manual handle is fitted as standard to assist in manoeuvering the trailer when used away from the towing vehicle (or for hand reversing for those of us who find reversing the tractor or quad impossible!).

The body of the QPTP is moulded from a strong commercial-grade plastic so it will withstand the carting of corrosive material, such as animal waste, without causing body rot.

The QPTP plastic bodied trailer with wide profile wheels is fitted with 50mm ball hitch as standard.

This SCH scarifying rake has four rows of heavy-duty spring coiled tines which are arranged in a staggered pattern and will tease out the thatch and dead grass from paddocks and large grass areas.  A weight tray on top of the unit allows ballast weight to be added to give extra penetration. 

Depth control wheels which also act as transport wheels are fitted as standard, as well as a rise & fall clevis hitch to ensure that all the tines are level whatever the height of the tow hitch.

Please note: To avoid damage during transit, the tines are supplied loose, and SCH fit only one tine as an example of how to do this.